Suchergebnisse
Suchergebnisse 1-20 von insgesamt 68.
-
(Zitat von Duke) Hi Duke, it is very unlikely. I have never read about that in the Mazda3revolution forum. I mean, there are some values that handle the information shown in the instruments cluster for automatic cars, but there is no way to directly tweak the gearbox (not that I know of). You should ask to the workshop that messed with it on the 1st place.
-
(Zitat von ThomasK) Sounds like you have an older (unstable firmware) from factory. Plug the adapter to a wall USB charger adapter (not to the car). Then update the firmware to the latest version available. You can do that connecting your phone wifi to the network created by the device and navigate with safari to 192.168.50.2. Then you will see the device settings and menu to update. If you want you can use a USB update instead.
-
(Zitat von Turmalin_MX5) Hi, sorry I didn't see this on time but it seems that you achieved the update without problems. It was the same for me, carlinkit v2 was not usable as received and it needs to be updated before use. I believe that the safest way is to plug the devide to a power source adapter (not the car) and then connecting to it through the web browser and updating over the air.
-
(Zitat von Lukaas) Apologies, yes, I meant the Carlinkit device. I understand thatthere are so other unbranded clones with the same looks and hardware (Zitat von Turmalin_MX5) Carlinkit 2.0 works fine with my Nd2 and others report the same in the American forum and in the reddit forum about these devices. It did not work well with firmwares before January this year, but now is stable.
-
(Zitat von oxe23) There are actually 2 generations of devices, the 1st one has a fixed length USB-A cable whereas the 2nd generation has a USB-C input and you can use your own USB-A to USB-C cable (a short one is included ). I find the gen2 devices more practical, smaller and estetically more polished
-
(Zitat von sil-ber) Silver, I got the carlinkit v2 a couple of weeks ago and it works fine in the ND. I paid 75, delivered in 3 days at the Aliexpress officiall store (https://nl.aliexpress.com/item…8148356.11.1b3e3591qySAoj)
-
Interesting find, so who is going to be the first to test?
-
American cars do not have the plastic covers for unknown reasons. The parts are: N243-56-1B0 (FRONT DOWN COVER, 46.91 Eur) NA1P-56-39ZA (SEAL PLATE COVER; AIR ENTRY, 30.72 Eur) The American colleagues are actually very jealous and there is a thread at their forum where they wanted to organise a group buy of these parts
-
a couple of things to check: - Make sure that the function is re-activated in the safety section of the MZD. Even if the option is checked, press reset ro it re-reads the CMU as built values - Unlikely, but make sure that your GPS card is inserted and you sync the position outdoors (in case that you are underground without coverage E.DIT: I have seen in another thread that your GPS system is not working properly, so the TSR problem is definitively linked to that (it requires a GPS card inserted)
-
Make sure that the phone allows the contacts to sync. Tap 'Settings', then 'Bluetooth', find the mazda device. Tap the 'i' icon beside it and ensure all of the boxes are checked, Including 'Sync Contacts '
-
https://static.nhtsa.gov/odi/tsbs/2019/MC-10153305-9999.pdf
-
Have you read thi? https://forscan.org/faq.html#qforum1 You should get an answer in <24 hours if the account is approved (nothing special needed except to provide real information to filter bots). Have you checked if the confirmation email has been filtered as spam on your side?
-
I have taken a quick look and the obdlink app records all the values that you configure in real time and they are saved with the gps data. These can be exported as .csv files. I think that from there, it is a question of which video editing software you use and how it allows to incorporate this stream of data into overlayed gauges. It seems that some camera video editors like garmin virb or gopro software allow to do this directly, and there are also some dedicated programs that can do this. I h…
-
I believe OBDlink app, which is included with the adapter, can record graphs of the variables that you configure. I don’t know how many though, by default i can see 4. Not sure about dash widgets, i’ll try to check tomorrow. Likely other apps allow this as well
-
(Zitat von Birdie) Hi Birdie!. I'll try to answer your questions. - there are currently no iOS apps that can transfer the mobile display to the MZD, like Torque does in Android through OBD2AA. This is an Apple decision to not allow apps other than GPS / multimedia / communications categories. It is not likely that this would change anytime soon (but you never know) - Recommended adapter would be MX+. The MX would be not compatible with iphone due to lack of BLTE compatibility. The Wlan version i…
-
(Zitat von Bar) That looks great!
-
(Zitat von ChrizZ Mx) I-stop deactivation needs editing two chains in module SSU As Built: 731-01-01 and 731-01-02. It seems that you have already figured out the changes, haven't you?